Power Soak 34774 PS-225 Service Manual - Manual (Page 42)

36
9.1 The pump will not start when the green “Start” button is
pushed.
9.1a. Control panel Status (green) light is not on or flashing
Possible Cause
1. The power supply to the machine is turned off.
2. The temperature in the wash tank or motor has exceeded the high temperature limit.
3. The transformer has failed.
Solution
1. Restore power to the machine; check the circuit breaker in the wall mounted
enclosure.
2. Lower the water temperature by adding cool water or check motor and heater
thermo-discs (see sections 7.2 & 7.4).
3 Check the transformer output (see section 6.5)
9.1b. Control panel Status (green) light is flashing and Wash Tank (blue)
light is on.
Possible Cause
The Wash Tank is empty or the wash solution life cycle has expired.
Solution
Fill the wash tank with water and detergent according to the instructions in the
operator’s manual. If the wash tank is full, the life of the wash solution has expired; the
tank must be drained and re-filled.
9.1c. Control panel Status (green) light is flashing and Sanitize Tank (red)
light is on.
Possible Cause
The Sanitize Tank is empty or the sanitize solution life cycle has expired.
Solution
Fill the sanitize tank with water and sanitize solution according to the instructions in the
operator’s manual. If the sanitize tank is full, the life of the sanitize solution has expired;
the tank must be drained and re-filled.