Power Soak 34774 PS-225 Service Manual - Manual (Page 10)

4
Detergents and Sanitizer – Section 3
3.1 Detergents
Power Soak machines require a low-foaming, metal/aluminum-safe detergent. The
detergent should have good grease cutting abilities and pH level that is safe for human
contact. Improper detergents may damage the equipment. Use of the correct detergent
in the Power Soak PS-225 is critical to its washing performance. If there are problems
with cleaning results, please contact Power Soak Systems (1-800-444-9624).
3.2 Sanitizers
A "chemical sanitizing" method is used in the Power Soak system. There are a number
of products on the market that work well in this application. A chemical sales
representative should assist in selecting the proper sanitizer for each application. Check
with a cleaning chemical provider to determine the detergent concentration, sanitizer
"parts per million" (ppm) and sanitizer submersion times that will meet local health
codes.
3.3 Factory Assistance
If a chemical sales representative is having difficulty selecting a detergent or sanitizer,
or if there are poor results with the chemicals that have been recommended, please
contact a Power Soak representative at:
1-800-444-9624.
Detergents with high or low pH level will damage the
equipment and be harmful to human contact. Consult
with a chemical manufacturer representative for
recommendations on the selection of detergents.