Adaptec AHA-1510A - Manual (Page 57)

▼ ▼ ▼ ▼
AHA-1510A/20A Series User’s Guide
Stock Number: 510400-00, Rev. C
Page: A-1
Print Spec Number: 491842-00
Current Date: 11/18/94
ECN Date: 11/29/94
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
A
A
A
A
A
A
A
A
A
A
A
A
A
A
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
A
A A
A
A
A
A
A
A
A
A
A
A
A
A
A-1
A
Support for Large
Disk Drives
Extended Translation (Using MS-DOS 5.0)
All current versions of DOS are limited to 1024 cylinders per drive.
The standard translation scheme for SCSI host adapters, using
64 heads and 32 sectors, provides a maximum accessible capacity of
1 GByte. As disk drives have recently grown beyond 1 GByte in for-
matted capacity, they have run up against the DOS 1024-cylinder
limit. To continue its support for all SCSI disk drive capacities under
DOS, Adaptec has included an extended translation scheme for
AHA-1520A/1522A host adapters. This feature supports disk drives
as large as 8 GBytes under DOS.
When to Enable Extended Translation
Extended translation is disabled by default. Use extended transla-
tion for > 1 GByte hard disks under DOS. Use standard translation,
not extended translation, on drives formatted with two or more par-
titions for different operating systems. Partitions for NetWare can be
larger than 1 GByte when using standard translation. For instruc-
tions on enabling extended translation, see Chapter 2, Host Adapter
Configuration.
Caution: Be sure to back up your disk drive before you
change the translation method on a disk drive. All data
is erased when you change from one translation scheme
to another.