HT instruments HT710 - Manual (Page 37)

HT710
EN - 15
7. SERVICE
7.1. WARRANTY CONDITIONS
This equipment is guaranteed against any material fault or manufacturer’s defect, in
accordance with the general conditions of sale. During the warranty period (one year),
faulty parts may be replaced, with the manufacturer reserving the right to decide either to
repair or replace the product.
In the event of returning the equipment to the after-sales service or to a regional branch,
the outward transport is payable by the customer. The delivery must be agreed in advance
with consignee.
For delivery indicate, by means of an enclosed note, as clear as possible, the reasons for
returning it. Use only the original packing.
Any damage caused by shipment using NOT original packaging will be charged in any
case to the consignor.
The manufacturer will not be responsible for any damage to persons or things.
The warranty doesn’t apply to:
• Accessories and batteries (not covered by warranty).
• Repairs made necessary by improper use (including adaptation to particular
applications not foreseen in the instructions manual) or improper combination with
incompatible accessories or equipment.
• Repairs made necessary by improper shipping material causing damages in transit.
• Repairs made necessary by previous attempts for repair carried out by non skilled or
unauthorized personnel.
• Modifications to the equipment without explicit authorization from our technical
department.
• Adaptation to a particular application not provided for by the definition of the equipment
or by the instruction manual.
The contents of this manual may not be reproduced in any form whatsoever without the
manufacturer’s authorization.
Our products are patented and our logotypes registered. We reserve the right to
modify specifications and prices in view of technological improvements or
developments which might be necessary
.
7.2. SERVICE
If the equipment shouldn’t work properly, before contacting the SERVICE, test the battery
condition, the test leads, etc., and change them if necessary.
If the equipment still doesn’t work check if your operating procedure agrees with the latter
described in this manual.
In the event of returning the equipment it must be re-sent to the after-sales service (at
address or to a regional branch), the outward transport is payable by the customer. The
delivery must be agreed in advance with consignee.
For delivery indicate, by means of an enclosed note, as clear as possible, the reasons for
returning it. Use only the original packing.
Any damage caused by delivery with NO original packaging will be charged in any case to
the consignor.