HT instruments HT7051 - Manual (Page 29)

HT2055
EN - 28
9 CONNECTION OF THE INSTRUMENT TO PC
The saved data can be transferred to PC by using the TeraView software provided with
instrument.
TeraView
software permits the following operations:
 Download data from meter
 Define customized settings on the final report
 Analyse the results of measurements in numerical and graphical screens
 Print the final report
 Export the data to text (TXT) format file
MINIMUM SYSTEM REQUIREMENTS
Pentium III – 500MHz
512 MB RAM
100 MB free space on HD
CD-ROM reader
USB/serial port
Video resolution 800x600
Windows systems: Win2k/XP/Vista/Win7 32 bit and 64 bit platforms
9.1 INSTALLATION OF SOFTWARE AND INITIAL CONFIGURATIONS (WIN XP)
1. Close all open applications on the PC
2. Insert the supplied CD-ROM in the PC reader
3. Launch the “TeraView.exe” file included on CD-ROM and follow the steps to correctly
install the TeraView software
4. Switch on the instrument and connect it to the PC by using the supplied USB cable or
the PS/2 – RS-232 serial cable connected to a COM port. The USB port have always
priority
5. Read the “Instal_USB_neutral.pdf” file inside the “Handbook” folder for the installation
of USB driver on the PC
6. Launch the TeraView software
7. Select the command “Config  Password…”, type the serial number of meter and the
password (which is indicated on the CD-ROM label) and confirm with “Add” (see Fig.
36)
Fig. 36: Insertion of initial password