HT instruments HT7051 - Manual (Page 13)

HT2055
EN - 12
6 INITIAL OPERATIONS WITH HT2055S UNIT
Press the or function keys to display the below screens relative to the
earth/resistivity measurements and Settings (see Fig. 12)
Fig. 12: Screens of general menu
6.1 SETTINGS
The below operations are possible within Settings menu:
 Language selection (see § 5.1.1)
 Restore of default conditions
 Setting power of current generator
 Setting of alarm conditions when switching off test current
 Recall at display of saved results (see § 8.2) and clear memory (see § 8.3)
 Time/date setting (see § 5.1.5)
6.1.1 Default
settings
This section permits to restore the default value (factory) of measurement parameters and
limits set on the instrument
Fig. 13: Initial settings screen
1. Press or keys to enter Settings menu
2. Select the item “Initial Settings” with the  or  keys and press TEST key
3. Select the “NO” or “YES” options with the  or  keys and confirm with TEST
4. Press ESC key to exit and go back to the previous screen
The default values are the following:
Contrast 50%
Language English
Alarm
Disabled
Power of generator
100%
Distance “a”
2.0m