HT instruments HT7051 - Manual (Page 28)

HT2055
EN - 27
8.3 DELETE SAVED RESULTS
The following operations are available:
 Deletion of all memory
 Deletion of data in single selected locations
 Deletion of generated currents (only for station unit)
Deletion of internal memory
1 Selected the item “MEMORY  CLEAR ALL MEMORY” inside settings menu (see §
5.1). The following screen is displayed
Fig. 33: Deletion of internal memory
2 Press TEST key to confirm the operation. The message “CLEARING MEMORY” is
displayed
3 Press ESC key to exit without performing any operation
Deletion of single measurement
1 Select the item “MEMORY  DELETE RESULTS” inside settings menu (see § 5.1).
The folowing screen is displayed
Fig. 34: Deletion of single measurement
2 Use the  or  keys to select the type of location (Object / Loc1 / Loc2) and the  or
 to decrease or increase the numerical marker associated to the location (range 1 ÷
199)
3 Press MEM key. The message “CLEAR RESULTS?” is displayed
4 Press
TEST
key to confirm the operation or ESC to exit the function
Deletion of generated currents
If the meter and station units are synchronized (see § 5.1.3 and § 7.2) the values of
generated currents are stored (together with time and date) in a separated part of the
station’s memory. For delete this currents on the station unit follow the herewith steps:
1 Select the item “MEMORY  CLEAR CURRENT LOG” inside settings menu. The
following screen is displayed
Fig. 35: Delete generated currents
2. Press TEST key to confirm the operation. The message “CLEARING MEMORY” is
displayed or press ESC to exit the function