SecurityMan Cyber Eye - Manual (Page 58)

CyberEyes User’s Manual Rev.1 56
set Beginning Time, click the Set as current image time button after an image is chosen. The same is
true for setting Ending Time.
How to Use Image Playback
Ÿ To play back images:
Ÿ Click Image Playback in the control bar. The Image Playback interface will appear.
Ÿ
Select image source either from the Choose Channel pull-down list or by clicking the Open existing file
button in the Image Source region. After a valid source is selected, the related image will appear in the
window view.
Ÿ Click on the Play button under the Play Control list to start playing back images. You can adjust
different playing modes by clicking other buttons under the Play Control list.
Ÿ
After the desired image source is chosen, you can easily search, save or delete the recorded images
as required, however, you need to make an image selection before searching, saving, or deleting
images. There are two methods for selecting an image:
Ÿ Method 1: Specify time
Ÿ Input the valid beginning time in the Beginning time input box. For example, 2002_8_14 13:10:48
means year 2002, August 14, 1:10 PM and 48 seconds in the afternoon.
Ÿ Input the valid ending time in the Ending time input box.
Ÿ Method 2: Select images
Ÿ If you are playing back images, please stop it first.
Ÿ Double click on the yellow lines in the motion picture graph of which you wish to select the image,
and the displaying image will change with the shift of the red vertical line. Here the image is rightly
corresponded with the current location of the red vertical line. Click to the location you want the
image to begin, and click on the Set as current image time button in the Beginning Time region.
Ÿ Click to the location you want the image to end, and click on the Set as current image time button
in the Ending Time region.
Ÿ To search, save, and delete images:
Ÿ Searching images:
Ÿ Click the Search tab.
Ÿ Select the time frames (defined between the Beginning Time and the Ending Time) you want to
search.