SecurityMan Cyber Eye - Manual (Page 49)

CyberEyes User’s Manual Rev.1 47
Ÿ Change Password
Ÿ Next time auto login: if a check mark is placed beside this function, CyberEyes will automatically
login as this user type the next time you run CyberEyes. For example, if you login as a User and
place a check mark beside this function, you will automatically login as a User the next time you run
CyberEyes.
Ÿ Alarm Delay
Ÿ Enable alarm delay while keyboard or mouse did not action: if a check mark is placed beside this
function, CyberEyes will only activate the windows alert function after the keyboard or mouse is left
inactive after a preset period. For example, if you set the delay time to 2 minutes, then CyberEyes will
only activate the windows alert function 2 minutes after the keyboard or mouse is left inactive. Any
movement detected within these 2 minutes will not be counted as alarm. This alarm delay function is
similar to your door alarm in which you are allowed to open and close the door within 30 seconds after you
set the alarm and not trigger an alarm. If a check mark is placed beside this function, the channel that
Change Password: this function allows you to assign
and change passwords for different users. The
Administrator is the only user type that has the right to
assign passwords.
As can be seen from
the left, there is a red
frame on the viewing
window of Channel 1,
because a check mark
is placed beside the
Enable window
notification when
alarm occurs function.