SecurityMan Cyber Eye - Manual (Page 52)

CyberEyes User’s Manual Rev.1 50
3. After you are finished with manual recording, click the left button of the Manual REC. button to end the
operation
To perform manual recording for all four channels in quad screen at the same time:
2. Click the right button of the Manual REC. button to stop recording.
Note: You cannot choose to manual record all four cameras in quad screen if you have already chosen
to record one camera. Vice versa is true.
Camera Snapshot
This function allows you to take a still picture from the displaying images.
To take a still picture from a single channel:
1. Click on the channel in the work area that you want to take a snapshot of
2. Once you see an image that you would like to take a snapshot of, click the left button of the Camera
Snapshot button
1. Click the right button of the Manual REC. button to start recording.
If you try to manually record single channel in additional
to quad screen recording, you will get a prompt that
advises you to stop 4-channel recording first. Click OK
to close the prompt.