FEC AFC1500 - Manual (Page 8)

Transport the equipment properly according to its weight.
Failure to observe this instruction may cause
The conditions when transporting the equipment by ship is as below.
◆Ambient temperature: -
◆Ambient humidity: 50% RH or lower
◆Package: Tight seal
◆Rust prevention measure: Apply grease or oil on tools.
Failure to observe this instruction may cause
Do not hold cables and output spindles when t
Failure to observe this instruction may cause
Do not hold the indictor on the
The indicator may come off and drop from the front panel.
Failure to observe this instruction may cause
The equipment shall be stored under the following conditions.
◆Ambient temperature: -
◆Ambient humidity: 90% RH or lower
◆Atmosphere: Indoors (Avoid direct sunlight)
No
corrosive gases or flammable gases
No oil mist, dust, water, salt, iron powder
◆Avoid direct vibration or shocks
Failure to observe this instruction may cause
Safety Precautions
Transportation / Storage
Transport the equipment properly according to its weight.
this instruction may cause injury and malfunction.
The conditions when transporting the equipment by ship is as below.
-5°C ～+55°C (Avoid freezing)
0% RH or lower (Avoid moisture)
Rust prevention measure: Apply grease or oil on tools.
this instruction may cause earth leakage and malfunction.
Do not hold cables and output spindles when transporting the tools.
this instruction may cause injury and malfunction.
indictor on the front panel when transporting the AXIS Unit.
The indicator may come off and drop from the front panel.
this instruction may cause injury and malfunction.
The equipment shall be stored under the following conditions.
-5°C ～+55°C (Avoid freezing)
Ambient humidity: 90% RH or lower (Avoid moisture)
Indoors (Avoid direct sunlight)
corrosive gases or flammable gases
No oil mist, dust, water, salt, iron powder
Avoid direct vibration or shocks
this instruction may cause earth leakage and malfunction.
Safety Precautions
Caution Transportation / Storage