FEC AFC1500 - Manual (Page 7)

Do not remove the motors and gear case
The tool output spindle may rotate and cause injury.
Do not repair, disassemble, or modify the equipment
Failure to observe this instruction may cause
Never operate the equipme
or flammable gases. Failure to observe
Keep fingers away from the
the equipment is turned OF
Wiring operation and maintenance work shall be conducted by a
Failure to observe this instruction may cause
Turn OFF the power when conducting wiring operation
Failure to observe this instruction may cause
Never damage the cables, apply excess
Never use damaged cables.
Failure to observe this instruction may cause
Conduct type-3 grounding of FG terminals.
Failure to observe this instruction may cause
In case of an abnormal odor, noise, or operation error
and turn OFF the power source.
Install a Power shutdown device
Failure to observe this instruction may cause
Install an emergency stop circuit
promptly. Failure to observe
Keep away from the equipment
measures are conducted after
Failure to observe this instruction may cause
Safety Precautions
and gear cases of tools while power is applied..
output spindle may rotate and cause injury.
Do not repair, disassemble, or modify the equipment individual components of the system.
this instruction may cause injury, electric shock, fire, and malfunction.
Never operate the equipment where it is exposed to water, near a corrosive atmosphere
Failure to observe this instruction may cause fire.
Keep fingers away from the connectors while the equipment is turned ON and for a while after
the equipment is turned OFF. Failure to observe this instruction may cause electric shock
operation and maintenance work shall be conducted by a qualified professional.
this instruction may cause electric shock and injury.
Turn OFF the power when conducting wiring operation and maintenance.
this instruction may cause electric shock and injury.
damage the cables, apply excess stress to cables, or squeeze the cables.
Never use damaged cables.
this instruction may cause electric shock and fire.
3 grounding of FG terminals.
this instruction may cause electric shock.
abnormal odor, noise, or operation error occurrence, stop operation
source. Failure to observe this instruction may cause injury and fire.
device in order to ensure the safety of equipment.
this instruction may cause injury.
emergency stop circuit on the outside of equipment in order to stop operation
Failure to observe this instruction may cause injury.
Keep away from the equipment during recovery from a temporary blackout, and
fter restarting the equipment. The equipment may suddenly restart.
this instruction may cause injury.
Warning
Safety Precautions
individual components of the system..
injury, electric shock, fire, and malfunction.
atmosphere
for a while after
electric shock.
professional.
the cables.
stop operation immediately
injury and fire.
peration
, and ensure safety
suddenly restart.