4 motion detection – KT&C KVR-0412H User Manual

Page 61

H Type

360x240 (360x288) 720x240 (720x288)

720x480 (720x576)

1280 x 720

1920 x 1080

4 Channel DVR

Max. 30 fps per Channel

I Type



Analog Input (CH 1 ~ 4)

NTSC(PAL)

360x240 (360x288)

720x240 (720x288)

720x480 (720x576)

960x480 (960x576)

4 Channel

120 (100)



HD-SDI Input (CH 5 ~ 8)

360x 240(288)

720x240(288)

720x480(576)

1280 x 720

1920 x 1080

4 Channel SDI

Max. 30 fps per Channel



Click ( ) each frame on ‘Quality’ column to select recording quality of a corresponding camera. User may select its

recording quality from Super, High, Std and Low.



Click ( ) each frame on ‘Duration’ column to select recording duration (i.e., 10 second ~ 10 minute) of a corresponding

camera.



User may change the setting values of Resolution, Frames, Quality and Duration at a time by clicking the menu tab.



Choose ‘OK’ to confirm the setting.

NOTE

E, F, G, H and I Type DVR can detect 1080i, 1080p or 720p HD-SDI signals. If user connected Camera before the booting, each
signal is automatically detected and recognized (Auto Detection).

CAUTION

IF USER CONNECTS DIFFERENT TYPES OF HD-SDI SIGNALS WHILE DVR IS OPERATING. IT MAY CAUSE MALFUNCTIONS OF DVR.

4.5.4 Motion Detection



Please click ( ) RECORD>Motion Detection and the following screen will appear.



The Motion Detection menu will allow user to set Motion detection alarm.



Press SETUP key (or right mouse button) and the SETUP menu will appear.



SETUP menu descriptions.

Camera: select camera for setup.

Sensitivity: select sensitivity (Low, Normal and High)

Reverse Vert: activate the entire column at the cursor’s position.

Reverse Horz: activate the entire row at the cursor’s position.

Select All: active all blocks.

Deselect All: deactivate all blocks.

Copy to All Cameras: The present channel setup applies to all other cameras. Only when click save button, the changed

setup can be saved.

Save: save the new settings and go back to previous menu (page).

Exit: ignore the new settings and go back to previous menu (page).

Cancel: cancel Motion Setup menu.



Choose ‘OK’ to confirm the setting.