KT&C KVR-0412H - Manual (Page 36)

36
 When user completes Version input, please click ( ) Record. Then, the following screen will appear.
 The screen shows start time and end time of recorded data.
Overwrite Setting
 Click ( ) Overwrite Setting button and the following screen will appear.
 User shall designate the total recording days from 1 day to 30 days and unlimited.
 User may set for beeping or notifying messages that notify the used percentage of disk.
 Check Disk Overwrite and user may activate the overwrite function.
- This function makes restart the recording from the beginning when the HDD is full. The previous recorded data will be
erased from the first one. Following icon will display in bottom of live mode. .
① Uncheck (□) Disk Overwrite, recording will stop automatically when the HDD is full.
② At no Overwrite mode, icon will appear when HDD capacity is full that indicates the recording has stopped and,
icon will appear while the recording is going on.
③ If user changes this setting, the warning message will appear. Then click ( ) “confirmation” button and user may change
the setting.
 If user checks () Disk full notify item, the warning message will appear as the used amount of disk.
① Used
- User may set the certain value of HDD usage for notification. It will notify at that point. The values are from 50 ~ 100%.
② Alarm-Out
- The Alarm-out will happen at the used amount of HDD which is specified at Used.
③ Beep
- Check (), the warning sound will happen at the used amount of HDD which is specified at Used.
④ Blink Message
- Check (), the warning message “Disk Used(xx%)!” will appear on the OSD.
CAUTION
IF USER USES “Rec Days” FUNCTION, DVR WILL STORE ONLY THE DAYS THAT SPECIFIED BY USER. PLEASE
BEWARE OF DATA LOSS DUE TO “Rec Days” FUNCTION.
Record