KT&C KVR-0412H - Manual (Page 212)

212
13.5.6 System Dimension Diagram
13.5.7 Connector Wiring
13.5.7.1 1 In/ 1 out HD-SDI Connections
 Connect a HD-SDI device (e.g. Camera) to ‘HD-SDI IN’ of HD-SDI repeater.
 Connect the HD-SDI device (e.g. DVR) to ‘HD-SDI OUT’ of HD-SDI repeater.
13.5.7.2 Power Supply Connections
 Plug the power supply adapter (DC 12V, 3.33A) which is included in this product to ’DC12V’ connector and plug another
side to power source and Input voltage is a free volt (100 VAC ~ 240 VAC).
13.5.8 Cable
 75 ohm coaxial cable
NOTE
The cable above is not included in the package.
13.5.9 Display
13.5.9.1 LEDs
KEYS Operating mode
Power LED
(Red)
• Light off: Repeater off
• Light on: Repeater on
Connection LED
(Green)
• Light off: Not connected
• Light on: Connected