GxT V095-01 Automotive Analyzer - Manual (Page 8)

8
98 9
LOBAT
MAX
MIN
Ω
HOLD
Continuity Display
Ohms
The highest Ohms range
allows up to 40M Ohms
to be measured. All of the
ranges except the lowest
use a low current source that will not
forward bias semiconductor junctions.
The lowest Ohms range does use
source current that can cause
semiconductor junctions to conduct
and affect the readings.
The Diode Volts range will measure
semiconductor junction voltages up to
1.999 In the reverse direction an OFL
indication is expected.
The continuity test, indicated by both
the beeper symbol and the Ohms
symbol being active, uses the lowest
Ohms range. Anytime the reading goes
below 100 the beeper will sound.
Note: The meter is equipped with a self
protection device that will protect the
ohms function in case the test leads
are connected to battery voltage.
Supported Functions:
Ohms
88 3
LOBAT
MAX
MIN
AUTO
M Ω
HOLD
REL 0
Ohms Display
88 4
LOBAT
MAX
MIN
HOLD
Diode Display
HOLD
Min
Max Range
REL
Zero