I-View FAC – 500 FingerKey Access Controller DVR User Manual
Page 96
95
2).
Click the “Set up Access Controller” button to enter the Access Controller
setting dialog.
“Set up Access Controller” Function Description:
Fingerkey: To select a FingerKey device.
` Enable FingerKey: To enbable or disable a FingerKey.
Set up Schedule: To set up monitoring schedule of the FingerKey.
Event Selection:
1). Trigger: To set the actions of the Witness while the FingerKey has been
triggered.
2). Verify Fail: To set the actions of the Witness while the FingerKey verify
fail.
3). Verify OK: To set the actions of the Witness while the FingerKey verify
success.
4). Disconnect: To set the actions of the Witness while the FingerKey has been
disconnected.
5). Door Open: To set the actions of the Witness while the door is open.
Actions to take when triggered:
Pop up Video window: To enable about if the Witness will pop up video
window while the event has been triggered.
Enable Recording: To enable about if the Witness will start recording
with the “Selection camera” setting while the event has been triggered.
Enable Snapshot: To enable about if the Witness will implement a
snapshot with the “Selection camera” setting while the event has been
triggered.