I-View IR-5MIPN42 5-Megapixels IR Bullet IP Camera User Manual
Page 49

49
Recording:
Click this button to setup the type of
triggered recording, storage media and schedule
recording. You can setup the Pre recording & Post
recording period with the video and picture format
on difference storage device. Please refer the detail process as below:
Recording:
Enable the” Schedule” recording and you can select “Continue recording “, “ Start
recording when network failed” and “ Schedule recording “ mode. As for the “ Start
recording when network failed” that will save the video clips on the SD card, please add the SD
card when you enable this recording mode.
“Triggered recording”: Setup Pre/Post recording period and maximum period is 10 seconds.
“Recording parameters” :
Streaming ID: Select the video streaming which we want to recording.
Save mode: There are two modes “Over write when full “and “Keep days “.
Pre-recording: The time you set to start recording before the scheduled time or the event.