I-View IR-5MIPN42 5-Megapixels IR Bullet IP Camera - Manual (Page 35)

35
4-3.
The Network setup Function Description
Click “ Setup “ icon to start setup the parameters of IP camera. You can configure basic IP camera
settings like data transfer protocol and data storage folder…etc.
Device Info: Click this button to check the current Mac number, Firmware version, model, and also
allow you entry the camera name on the “Device name:” tab. Click Save to change the setting.
Manage Device: Click this button to setup the parameters of IP camera and the detail description as
below:
IP Property: Click this button to modify the current Internet protocol with IPv4 or IPv6, IP
address, enable/disable DHCP and DNS IP address. The settings must be properly