I-View IR-5MIPN42 5-Megapixels IR Bullet IP Camera User Manual
Page 20
20
2.
Power cable: Connect to DC12V power adapter when use none POE Hub
3.
Network port: Plug the RJ-45 LAN cable of POE switch Hub. The Green LED on for power
OK; Green LED flash for communication.
4.
Audio out cable: Plug microphone into audio in and speaker into audio out.
Cables: (for Full function IP camera)
1.
Audio in & out cable: Plug microphone into audio in and speaker into audio out.
2.
Network port: Plug the RJ-45 LAN cable of POE switch Hub. The Green LED on for power OK;
Green LED flash for communication.
3.
BNC cable: Provide analog video signal for lens focus & view angle adjustment
.
4.
Power cable: Connect to DC12V power adapter when use none POE Hub
5.
USB cable: Provide USB slot on board storage also Wi-Fi/3G Modem adapter.
6.
Alarm in/Out cable: Alarm in for sensor input and Alarm out for relay trigger.