I-View IR-5MIPN42 5-Megapixels IR Bullet IP Camera - Manual (Page 38)

38
(2) Set the date of the DST period then click to save the settings.
Manual setup: Configuring Time Synchronization Manually.
(1) Check the Manual Time checkbox.
(2) Click to set the system time from the pop-up calendar and then click to save the settings.
You can also click the Save icon with computer time checkbox to synchronize the time of the IP
Camera with the time of your computer.
PC Time: Select this item and IP camera will synchronize the Date/ Time with your computer’s (or
NVR) time as its time. Click the Save icon for save the setting.
NTP Server: You can follow the instructions in this section to configure the time which can be
displayed on the video. There is Time Zone, Time Synchronization, Daylight Saving Time (DST)
functions for setting the time. Time Synchronization consists of auto mode by Network Time
Protocol (NTP) server and manual mode. Configuring Time Synchronization by NTP Server
(1) Check the checkbox to enable the Use NTP function.
(2) Entry IP address of NTP server and port of NTP server, 123 by default.
If the IP Camera is connected to a public network, you should use a NTP server that has a time
synchronization function, such as the server at the National Time Center (IP Address:
210.72.145.44). If the IP Camera is set in a customized network, NTP software can be used to
establish a NTP server for time synchronization.