I-View IR-5MIPN42 5-Megapixels IR Bullet IP Camera - Manual (Page 44)

44
Scene setup:
White balance: There are some scene modes to difference environments, such as Auto, Cloudy,
Sunny, Tungsten and Fluorescent mode
WDR: Allow to enable /disable WDR function.
Flickless: Set the Video Standard to 50hz(PAL) or 60hz(NTSC) according to the video system in
your country, Wrong frequency will show the scrolling lines on the video.
Noise reduction: The noise reduction function processes the noise between two frames besides
processing the noise in one frame. The noise will be much less and the video will be clearer
Choice the volume of noise reduction level high will show less noise but the image become fuzzy.
WDR: Allow to enable /disable WDR function.
IRIS: Provides auto and fixed mode, the value of iris speed needs to be adjusted manually.
D/N configure: Provides auto and fixed mode, allow adjust IRIS speed for application.
D/N mode: Enable “ Passive “ mode and keep on the “Black & White” mode of Night color
tab when you use IR type IP camera and none IR LED camera select the “Active” mode.
Sensitivity: Choice “ Higher” mode turn into the B/W at high Illumination. Click Save icon
to save the setting.