I-View IR-5MIPN42 5-Megapixels IR Bullet IP Camera User Manual
Page 47
47
I/O & PTZ setup:
You can setup the alarm input/output and PTZ protocol from this section.
PTZ:
Setup the PTZ parameters such as Baud rate, protocol and ID address. (Option)
Alarm I/O:
Alarm input: Setup the name of alarm input and define the level of trigger single.
Alarm output: Setup the name of alarm output; define the mode (NC or NO) and trigger period. (0
ms: Continue trigger)
Alarm Trigger:
You can setup the image motion
trigger and sensor alarm trigger from this section.
The detail process show as below:
This manual is related to the following products: