Antex Electronics SX-26 Digital Audio Adapter User Manual

Page 21

2. Select "Antex Audio Driver for Windows" from the list of installed

drivers. Click on Setup.

3. To set adapter type:

"Antex Audio Driver Setup" displays the adapter types assigned
to adapters 1-4. Change the type by using the drop down
menus for each adapter. Information about the number of
devices, I/O address, and interrupt number are displayed to the
right of each adapter.

4. To set the number of devices, I/O address, or interrupt number:

Select Advanced in "Antex Audio Driver Setup". Select an
adapter to reconfigure.

Change the number of devices, I/O address, or interrupt
number by selecting the appropriate buttons. Invalid choices
are displayed in gray.

Test new settings by selecting Test.

NOTE: The driver version number and date displayed in the
middle left of the "Antex Advanced Setup" screen. Refer to this
information when reporting problems to Antex Technical Support.

This manual is related to the following products:

SX-23e Digital Audio Adapter SX-22 Digital Audio Adapter SX-20 Digital Audio Adapter SX-12a Digital Audio Adapter SX-11 Digital Audio Adapter SX-9 Digital Audio Adapter SX-7 Digital Audio Adapter