Antex Electronics SX-26 Digital Audio Adapter - Manual (Page 12)

9
Audio Output:
Line:
Unbalanced - RCA jacks, 2VRMS/+6dBV max (digital
clipping), with an impedance of 470 ohms and a load
impedance of > 10 k ohms
Balanced - Nine pin D connector, -16 dBm maximum, with
an impedance of 47 ohms and a load impedance of 600
ohms
Headphone:
1/4" Stereo Phone Jack, 0.5 VRMS into eight ohms
SX-9, SX-11
There are 5 connectors located on the SX-9/SX-11 audio board's
metal mounting bracket. See Figure 5, 7 & 8. for more information
on the SX-9/SX-11 connectors.
Audio Output:
Line:
Balanced - Nine pin D connector 0 to +26dBu(digital
clipping) - software selectable with 1dBu resolution, with an
impedance of 50 ohms and a load impedance of 600 ohms
Unbalanced - 1/8” stereo mini jack 2VRMS/+6dBV max
(digital clipping), with an impedance of 470 ohms and a
load impedance of 10k ohms