Antex Electronics SX-26 Digital Audio Adapter - Manual (Page 15)

12
SX-23e/SX-26:
Balanced - Nine pin D connector 0 to +26dBu (digital
clipping) - software selectable with 1dBu resolution, with an
impedance of 20k ohms
Unbalanced - 1/8” stereo mini jack 2VRMS/+6dBV max
(digital clipping), with an impedance of 20k ohms and a
load impedance of 10k ohms
AES/EBU Digital (SX-22, SX-23e & SX-26):
7 pin Mini DIN jack. Professional AES/EBU: EIAJ CP-340
Type I / IEC-958 Pro or Consumer S/PDIF: EIAJ CP-340
Type II / IEC-958 Consumer
Audio Output
Line:
SX-22:
Balanced - Nine pin D connector (-10dBu, +4dBu and
+16dBu - software selectable) with an impedance of 20k
ohms.
SX-23e/SX-26:
Balanced - Nine pin D connector 0 to +26dBu(digital
clipping) - software selectable with an impedance of 50
ohms and a load impedance of 600 ohms or greater.
Unbalanced - 1/8” stereo mini jack 2VRMS/+6dBV max
(digital clipping), with an impedance of 470 ohms and a
load impedance of 10k ohms
Headphone (SX-22, SX-23e & SX-26):
1/4" stereo phone jack, 0.5 VRMS into 600 ohms or greater.