IPX DDK-1700 - Manual (Page 47)

4.1.3.4 Changing the System Settings
Follow the steps below to change the system date and time settings.
Setting the Time and Date of the system
1. Click on the System button to enter the “Time and Date” page (default). In this area you may
automatically or manually configure, update, and maintain the internal system clock of the
DDK-1700.
2. To set the Time Configuration select a time zone from the drop-down menu. Select Enable Daylight
Saving Time if required. Then select ”Auto Daylight Saving” or “Set date and time manually”.
3. To set the Automatic Time Configuration select “Synchronize with NTP Server” and enter the address
of the NTP Server.
4. To set the Date and Time manually select “Set date and time manually” and then select “Copy Your
Computer’s Time Settings” or manually set the date and time from the drop-down menus.
5. Click the Submit button to save the Date and Time settings.
47