Ohaus CD-33 Indicator - Manual (Page 25)

25
CD Indicators
LFT is Off
Mode Menu
WEIGH= On
PERCENT= On
COUNT= On
ANIMAL= On
CHECKWEIGH = On
EXP WGT= Off
Lock Switch is Off
Menu Locks
RS232= Off
READOUT= Off
GMPSET= Off
MODE= Off
UNITS= Off
PRINT= Off
GMP Data = Off
CAL= Off
GLOBAL= Off
CUSTOM= Off
SCALE=Off
Enabled Units:
g
kg
custm
C. Units:
1.000000
3.10 Global (Cont.)
List
This submenu can be used to output a listing of current menu settings via the RS232 interface. When YES is selected,
all menu settings will be output either to an external printer or computer. To use this feature, your Indicator must be
connected to a computer or printer. The default setting is OFF.
CD-31\CD-33
xxxxxxxxx
Time= 12hr 03:19:51 PM
Date= m/d/y 12/01/99
Function = Weigh
ReadOut Menu
Stb= .5d
AZT= .5 d
Filter= 1
GMP Menu
Time/Date= On
Scale Id= On
User No.= On
Proj No.= On
DIFF= On
Name= On
Print Menu
Auto Print= On Stb.
Interval= 1
Stable Print= On
NU= On
GMP Cont = On
GMP on Tare = On
Print Ref= On
RS232 = 2400: N
SAMPLE PRINTOUTS
The partial sample shown, indicates the status in the
menus.
Reset
Reset when set to YES will reset the Indicator to factory default settings. The default setting is NO.
Version
Displays software revision number for servicing purposes. This number is installed with the Indicator.
Lock
Lock when selected and set to ON, locks all of the entries made under the Global menu. The default setting is OFF.