Acumen AiP-Q4U - Manual (Page 38)

AiP-N series 16CH/9CH/4CH Manual
37
Chapter 5: Adding Cameras
Enter the setup menu
Select camera from the left hand options
Select WS discovery
The NVR will now search the network for installed cameras
Select Get Snap to make camera identification easier
Assign the relevant cameras to a channel by selecting channel number in right hand camera column
Exit menu setup and all installed cameras will be displayed
By default they are set to record on schedule 24 hours a day
Note: If the IP addresses of the installed IP cameras have not already been configured, they can be
changed by highlighting the channel and selecting ‘Set IP’.
Note: The installed IP cameras must be set to the same IP range as the NVR.