Acumen AiP-Q4U - Manual (Page 15)

AiP-N series 16CH/9CH/4CH Manual
14
Chapter 5: PTZ
If the camera is a Pan, Tilt and Zoom (PTZ) camera, you can control it via the following methods:
a. Via front panel
Select required channel
Use direction arrows to pan and tilt around the image
To zoom, use alternative method
b. Via remote control
Select required channel
Use direction arrows to pan and tilt around the image
Use and keys to zoom around the image
To send a dome to a preset positio n, press ‘preset’, followed by the number required. For example, for
preset 3, press ‘preset’ followed by ‘003’.
Press auto button to start auto pan tour
To deactivate the tour, press ‘auto’ again
c. Via keyboard
Select required channel
Use joystick (left, right, up and down) to pan and tilt around the image
Twist the joystick to zoom around the image
To send dome to a preset position, press numerical key followed by ‘preset’ For example, 5 followed by
‘preset’.
Press ‘auto pan’ to start auto pan tour
To deactivate the tour, press ‘auto pan’ again
d. Via touch screen monitor/ mouse
Select required channel