5 system utilities, 5-1 viewing hidden parameters, Other opera tions – Yamaha SRCP User Manual

Page 159

10-

OTHER OPERA

TIONS

10-5 System utilities

10-5-1 Viewing hidden parameters

Parameters hidden in the normal state can be viewed.
Use extra caution to avoid accidentally changing the parameters when these hidden parameters are
displayed.

1) On the initial screen, press

(SYS).

[MENU]

select menu

1EDIT2OPRT3SYS 4MON

[SYS]

select menu

1SAFE2OPT 3UTL 4next

[SYS-UTL]

select menu

1HDPR

[SYS-UTL-HDPR]

hidden parameter

displayed ?

1yes 2no

[SYS-UTL]

select menu

1HDPR

2REC

2) Press

(next) to change the menu display

and then press

(UTL).

3) Press

(HDPR) here.

4) A confirmation message appears.

To permit display of the hidden parameters,
press

(yes)

To hide the hidden parameters, press

(no).

5) The screen returns to step 3.

Display of hidden parameters is permitted un-
til you press

(HDPR) and then

(no),

or the SRCP controller is turned off, or until
the TPB is disconnected.

NOTE

The hidden parameter display is also permitted by turning on the power to the controller while holding down the

ESC

key on the TPB, or by connecting the TPB to the controller while holding down the

ESC

key.