Yamaha DSP1D User Manual
Optional boards, Dsp unit
![background image](/manuals/230960/1/background.png)
Optional Boards
for
DSP UNIT
T
hank you for choosing the board for Yamaha DSP1D (DSP unit).
Ask an authorized Yamaha service engineer to install the board. Do not install the board yourself.
The following items are optional boards available for the DSP1D.
INPUT DSP BOARD
IDB1D
CONSOLE INTERFACE BOARD
CIB1D
ENGINE MANAGEMENT BOARD
EMB1D
PATCH DSP BOARD
PDB1D
GROUP DSP BOARD
GDB1D
EFFECT DSP BOARD
EDB1D
■
Installing the board (For only an authorized Yamaha service engineers)
Before installing the board, be sure to turn off the power to the DSP1D and disconnect the power cord.
You need to remove the front cover of the DSP1D to install any board. To install the PDB1D board, you also need to remove the
left side cover.
1.
Remove ten screws as
shown in the picture. Do
not remove any other
screws. Keep the re-
moved screws in a safe
place since you will need
them to re-attach the
cover.
2.
As shown in the picture,
remove the cover by
opening from the right
side to avoid damage to
the hardware on the left
side of the rack.
front cover
hardware on the left side of the rack