Yamaha PJP-100H - Manual (Page 43)

39
CONF
IGUR
A
T
IO
NS
English
You can send information or the event which occurs in the system of this unit to another unit as the message (this is called
“Syslog”). “Syslog” contains information of such as start/shut down of this unit, login, the activity in normal states, the
states of an error. You can specify the level of the message if necessary.
1
In the web menu, click “Syslog Setting”.
The “Syslog” window appears.
2
Select the desired mode(s) which specifies
the kind of the sending message and click.
y
You can check marks of multiple modes to send all checked
messages.
• Debug Mode: Send the debug log to confirm the
inner activity when an error occurs.
• Info Mode (default setting): Send the operation
log such as the event or states of the activity of this
unit.
• Notice Mode: Send the details of the operation log
when this unit is in the normal states.
3
In the “Syslog Network Output” field, click
“Enable”.
4
In the “Syslog Host Address” field, enter the
host IP address of the destination unit.
5
Click “Submit”.
The syslog message specified in step 2 is sent to the
host address specified in step 4.
Confirming the System Log Message of This Unit (syslog)
01EN_00_PJP-100H_UCGB.book Page 39 Wednesday, August 23, 2006 3:04 PM