Using the sip server, Registering the sip server information – Yamaha PJP-100H User Manual
Page 39
35
CONF
IGUR
A
T
IO
NS
English
When this unit is used in an environment with a SIP
server, the address of the SIP server to be referenced by
this unit and the SIP address of this unit should be
registered. If password authentication is required for
accessing the desired SIP server, it is also necessary to
enter the password. Consult your system administrator for
details.
The settings described in this section are not required if this unit
is used in an environment without SIP server.
1
In the web menu, click “SIP Server”.
The “SIP Server” window appears.
2
In the “SIP Server” field, click “Enable”.
3
In the “SIP Server Name” field, enter the
name or IP address of the SIP server.
4
If password authentication is required for
accessing the desired SIP server, enter the
authentication password for the SIP server in
the “SIP URI Password” field.
5
In the “SIP URI” field, enter the SIP address
to be set to this unit.
Enter the SIP address in the format
“sip:(sip address)”.
Example: sip:[email protected]
6
Click “Submit”.
The setting is registered and the top window of the
web menu reappears.
• To connect a call using the SIP server, the SIP address
of this unit should be registered in the SIP server.
• It is not possible to establish a connection between a
PJP unit that uses the SIP address and a PJP unit that
uses the IP address.
• If the SIP server is installed outside the LAN, it is
required to use the NAT transversal function (page 27)
of this unit.
In this case, the following conditions are required.
• The router to which the PJP is connected supports the
UPnP function.
• A global IP address is assigned to the WAN on the
router side.
When a SIP call is connected using the NAT transversal function,
it is not possible to install multiple PJP units in a single segment
and connect a call between them.
Using the SIP Server
Registering the SIP server
information
Note
Notes on SIP server operation
Note
Branch A
Headquarter
Branch B
SIP server
Router
Router
Router
01EN_00_PJP-100H_UCGB.book Page 35 Wednesday, August 23, 2006 3:04 PM