Yamaha PJP-100H - Manual (Page 19)

Making a Call
15
B
A
SIC CALL
OPERA
T
IONS
English
Follow the procedure below to specify an IP address to call another unit. Both PJP units should be turned on and
connected to the network with a LAN cable.
1
Press repeatedly until the initial display
appears.
2
Use the numeric keys to enter the IP address
of the destination unit.
If you make an entry mistake, press (*) or
(#) to move the cursor below the number you want to
correct, and use the numeric keys to enter the correct
figure.
3
Press .
The calling display appears.
Making a Call
Calling another unit by specifying an IP address
1 2 3
4 5 6
7 8 9
0
MIC MUTE
LAN
VOL
DC IN 12V
IN AUDIO OUT
MIC MUTE
/ Numeric keys
VOL +/–
Menu :Address
IP: 192.168.0.10
[ ] [#]
000.000.000.000
^
[ ] [#]
000.000.000.000
^
192.168.100.20
:Cancel
01EN_00_PJP-100H_UCGB.book Page 15 Wednesday, August 23, 2006 3:04 PM