Yamaha PJP-100H - Manual (Page 22)

Making a Call
18
3
Press or to select the destination unit,
and then press .
The calling display appears.
The IP addresses of this unit and destination unit
appear if the call is connected by pressing on the
destination unit and conversation becomes available.
To adjust the speaker volume or disconnect the call,
follow steps 4 and 5 in “Calling another unit by
specifying an IP address” (page 16).
y
If a unit available for communication is already registered in the
address book, the name registered for the unit is displayed instead
of the IP address.
Follow the procedure below to call another unit by
referring to the history of past outgoing or incoming calls.
If the destination PJP unit obtains the IP address from the DHCP
server, its IP address may be changed from the last call. If your
call cannot reach the destination unit, check the latest IP address
configured at the destination unit.
1
Press in the initial display.
The menu screen appears.
2
Press or to select “2. Call History”, and
then press .
The “Call History” menu appears.
192.168.0.20
Online
192.168.0.20
:Cancel
Calling another unit using the call
history
Note
3. Online
2. Call History
1. Settings
Menu
Branch A
Headquarter
Headquarter
Call History
01EN_00_PJP-100H_UCGB.book Page 18 Wednesday, August 23, 2006 3:04 PM