Talking with multiple locations – Yamaha PJP-100H User Manual

Page 25

Talking with Multiple Locations

SIC CALL

OPERA

IONS

English

This unit is designed to enable a conference call between up to 4 locations (with the mesh connection). It is also possible
to call a new location (branch office or department) during a call. To establish a call involving multiple locations, first
connect a call with one of the locations and then call other locations one after another.

The mesh connection is available only when “G.711 Extension”
or “G.711 µ-law” is selected as the codec. See “Configuring the
codec” (page 31) and “Specifications” (page 53) for details about
the codec.

Conference call between multiple locations is also possible by
assigning each of the PJP units to be involved in connection as
either server or client, and establishing a call between the servers
that are connected to the clients. See “Hierarchical Connection of
Multiple PJP Units (Cascade Connection)” (page 40) for details.

■ To call another location during a call

Carry out one of the following procedure during a
call.

– Calling another unit by specifying an IP address

(page 15)

– Calling another unit using the address book

(page 17)

– Calling another unit in online status (page 17)
– Calling another unit using the call history (page 18)

The new location is added to the ongoing conference.

■ To answer a call during a call

Carry out the procedure in “Answering a Call”
(page 20).
The new location is added to the ongoing conference.

Talking with Multiple Locations

Note

Headquarter

Make a call

Call another location during a call

Connecting more than two locations

Connecting

Branch A

Branch B

Branch A

01EN_00_PJP-100H_UCGB.book Page 21 Wednesday, August 23, 2006 3:04 PM