Nortel Networks Passport ARN Routers - Manual (Page 86)

Installing and Operating Passport ARN Routers
3-14 114200-E Rev 00
Protecting Memory Card Files
Nortel Networks ships each memory card with its read/write protect switch in the
unprotected position
(Figure 3-5) . After successfully loading the configuration file
and saving your configuration, you may want to write-protect the memory card for
backup purposes.
To change memory card protection, complete the following steps:
1. Remove the memory card as described on page 3-13 .
2. Adjust the read-write protect switch, which is located on the edge
opposite the INSERT arrow of the memory card
(Figure 3-5) .
Figure 3-5. Memory Card Read/Write Protect Switch
3. Reinsert the memory card into the card receptacle (refer to Figure 1-27
on page 1-31).
Note: You typically do not operate the ARN with a write-protected memory
card. You should make a copy of your configuration on another memory card,
write-protect that card, and store it in a safe place.
Protected
Unprotected
Insert
6948