beautypg.com

Filling out the worksheets, Table b-1, Filling out the – Nortel Networks Passport ARN Routers User Manual

Page 109: Worksheets

background image

Using Local Boot (the Quick-Start Procedure)

114200-E Rev 00

B-3

Table B-1

provides the connector names and numbers you should use during the

Quick-Start procedure.

Filling Out the Worksheets

The inst_arn.bat script provides many options for configuring the ARN on a
network. Since typical remote access uses a serial interface over a wide area
connection, this sample describes only the options involved with a serial
configuration.

We suggest the following procedure when you fill out worksheets:

1.

Fill out the Global Information Worksheet completely.

The sample worksheet lists options common to all serial interface
configurations.

2.

After you record your protocol selections on the Global Information
Worksheet, fill out one
Router Protocol worksheet.

Table B-1.

Quick-Start Connector Names and Numbers

Module

Interface*

* The Quick-Start script does not support initial ISDN, X.25 PAD, or V.34 interface

configuration.

Base

Expansion

Adapter 1

Adapter 2

Ethernet

XCVR1

XCVR2

N/A

N/A

Token Ring

MAU1

MAU2

N/A

N/A

Serial

N/A

COM3, COM4,
or COM5

COM1

COM2

56/64K, FT1/T1, or
FE1/E1 DSU/CSU

N/A

N/A

COM1

COM2

Note:

This section provides worksheets only for a serial interface

configuration over a wide area connection. It does not contain worksheets for
LAN configuration options. If configuring a LAN interface, read the
Quick-Start text and prompts carefully before responding, as they will differ
from the serial sample.