PSC PT Program Generator - Manual (Page 92)

Managing Data
80
PT Program Generator (PPG) v5.0
Write Type
To select how the data is stored in the register, select the write type from one of
these options:
Specifying a Register Field
If you enable the Field checkbox for the Register Source or select Field as
the Write Type in a Register Destination , the template and field pull-down lists
become available. (refer to Figure 54 ).
Figure 54. Template and Field pull-down lists
• Select the template you want to use from the Template pull-down list,
and then select the field.
• To create a new template, select the New Template button (refer to
Creating a Template on page 85 ).
Insert Insert places the data at the beginning of the register, before any
existing data.
Overwrite Replace replaces any data previously stored in the register.
Append Append adds the data to the end of the register, after any existing
data.
Field Field stores the data in a specified field of the register (refer to
Specifying a Register Field on page 80 ).
2342.book Page 80 Thursday, July 22, 2004 8:35 AM