The output: error beep node, The display: error text node – PSC PT Program Generator User Manual

Page 131

Building a Custom Portable Program

User’s Guide

119

The Output: Error Beep Node

Now you need to set the

Output

node to sound a beep. Complete the follow-

ing steps:

1. Double-click the

Output: Error Beep

node to display its dialog box.

Figure 91. The Output: Error Beep Dialog Box

2. On the

Information to Output

tab, select

System as the

Output To

setting and

Constant as the

Data

Source

setting.

•

In the constant field, enter the characters

.+ (period and plus).

This is the command to sound a high beep.

•

Or enter

.– to sound a low beep.)

3. Press

to save your settings and exit the dialog box.

The Display: Error Text Node

You can have a special message appear when the error beep is sounded.

Double-click on the

Display: Error Text

node, enter the text shown in

and press

Figure 92. The Display: Error Text Dialog Box

2342.book Page 119 Thursday, July 22, 2004 8:35 AM