PSC PT Program Generator - Manual (Page 139)

Loading and Using the Program
User’s Guide
127
1. Double-click on the PPGXFER window's Control-menu box or select
File > Exit to close the window. (If downloading was unsuccessful,
choose Abort from the menubar first.)
2. Double-click on the Control-menu box in the Compiler window to
close it.
3. Disconnect the portable from the cable, and press the key to
begin collecting data.
4. Scan the following bar codes at least once. Each time a code is
scanned correctly, you should hear a single beep.
• You will not see the scanned codes on the portable’s screen,
because they are overwritten by the redisplayed menu once the
data is input.
• When you scan the last code, which contains an alphabetic
character, you'll hear a double beep, indicating an error.
5. Enter the following four codes using the portable’s data keys. The por-
table beeps each time you press a key. Press ENTER after each com-
plete number.
6. Press the key to return to the program's Main Menu .
12345 67890
98765 54321
* 1 2 3 4 5 6 * * 9 8 7 6 5 4 *
* 1 9 2 8 3 7 * * 2 2 3 3 4 4 *
* 9 1 8 2 7 3 * * 9 0 1 0 2 A *
2342.book Page 127 Thursday, July 22, 2004 8:35 AM