Logging tab, Sending and receiving data – PSC PT Program Generator User Manual
Page 108
PT40 Communication
96
PT Program Generator (PPG) v5.0
Logging Tab
Select the
Logging
tab to establish settings for the communications log. The
communications log can be helpful as a trouble-shooting aid.
Figure 67. Logging Tab of the File Transfer Utility
Select
OK
to save the settings and close the setup functions.
Sending and Receiving Data
Verify that the portable is properly attached to the host PC. If the portable
uses a dock, make sure that the dock is properly attached to the PC.
Refer to
, below for specifics on sending files. Refer to
for specifics on receiving files.
Log To File
Specifies that the log is to be written to a text file.
Log To Screen
Specifies that the log is displayed on screen.
Append to Log
This option becomes available when you select
Log to File
. When
enabled,
Append to Log
adds log information to the end of the log
file. If not enabled, new log information replaces the previous log file.
Log Path/
Filename
Specify the location for storing the communications log. If a path is not
given, the file is stored in the
Default File Transfer
folder.
Browse
Use the
Browse
button to locate a new log file.
2342.book Page 96 Thursday, July 22, 2004 8:35 AM