PSC PT Program Generator - Manual (Page 158)

Example Frames
146
PT Program Generator (PPG) v5.0
Figure 119. The Input: TO FILE Dialog
To download a file to a portable, set options for the Input node as follows:
Verify: DNLD Checks to see if was pressed and, if it was, continues to the Dis-
play node. If was not pressed, the program loops back to the
Input node and waits for further input.
Display: WAIT Displays Downloading, Please Wait on the portable’s screen.
Input: TO FILE Starts downloading the file. Options in its dialog box are set as shown in
Figure 119 on page 146 .
Display: DONE If downloading is successful, Display: DONE displays DOWNLOAD
DONE; = MORE; =QUIT on the portable’s screen.
Display:
TIMEOUT If downloading is unsuccessful, Display: TIMEOUT displays TIME-
OUT EXCEEDED; =TRY AGAIN; =QUIT on the por-
table’s screen.
Input: FKEY Both these Display nodes loop back to the Input: FKEY node, which
accepts the user’s function key input.
Serial Selected for the Input From option.
Time Out Selected for the Input From option. Should Link to a Display node
that prompts the user to try again.
Destination S et to the desired file. Choose to replace existing data or place new
data at the beginning or end of the file or at a given record number.
Echo to Display Enabled so that the user can see the file going into the portable unit.
2342.book Page 146 Thursday, July 22, 2004 8:35 AM