PSC PT Program Generator - Manual (Page 162)

Example Frames
150
PT Program Generator (PPG) v5.0
Location
Asset #
Date
Time
Example data:
Room 1,12345,2/24/2003,13:39:53
Room 1,12346,2/24/2003,13:39:58
Room 2,12347,2/24/2003,13:45:33
Room 2,12348,2/24/2003,13:39:43
If duplicate Asset #'s are to be disallowed, the Asset # must be looked up in
the second field and, if found, display a message and disallow the entry. Enter
“
12347” at the
Asset # prompt and store it in the Default Register field
Asset # , copy Asset # to the Lookup register, insert “ ~, ” on the front of the
entry and append “ , *” onto the end of the entry so the result is:
~,12347,*
Use the Lookup register in a Verify node as the comparison type against the
Default File to determine the existence of a duplicate record.
To search for a data in a file, complete the following steps:
1. Input Asset # into Default Register Asset # field
2. Copy the Default Register Asset # field to the Lookup register
3. Copy insert “ ~, ” onto the front of the Lookup register
4. Copy append“ , *” to the
Lookup register
5. In the Verify node, Verify Information tab, select File as the
Data
Type and File as the File =
Default File type.
6. In the Verify node, Verify Options tab, select ASCII as the
Data type,
Register as the
Comparison type, and Lookup as the
Register
type.
2342.book Page 150 Thursday, July 22, 2004 8:35 AM