The output: error beep node, The menu: error text node, Figure 96 on – PSC PT Program Generator User Manual
Page 135
Building a Custom Portable Program
User’s Guide
123
Figure 96. The Output To: PC Dialog Box
3. From the
Data Source
pull-down list, select
File. From the
File
pull-down list select
Monthly Inventory.
4. On the
Next Nodes
tab, select
Display Successful from the
Next Node
field and
Output Error Beep from the
On Error
field.
5. Press
OK
to save your settings and exit the dialog box.
The Output: Error Beep Node
Complete the following steps to set up this node:
1. Select the
Output: Error Beep
node to open its dialog box.
2. On the
Information to Output
tab, select
System as the
Output To
setting and
Constant as the
Source
setting.
3. Enter
.+ in the
Source
pull-down list. This is the code which tells the
portable to sound a high beep.
4. On the
Next Nodes
tab, select
Menu Error Text for both fields.
5. Press
OK
to save your settings and exit the dialog box.
The Menu: Error Text Node
Complete the following steps to set up this node:
1. Select the
Menu: Error Text
node and enter the text shown in
.
2. Enable the
checkbox and select
Output to PC from the
pull-down list to attempt a second output if the user presses
.
2342.book Page 123 Thursday, July 22, 2004 8:35 AM