Kyocera KM-C1530 - Manual (Page 202)

8 Administrator Mode Operations
8-32 KM-C1530
❍ Fold the printed page in half,
and then check that the test
patterns are aligned. Check that
the widths of both margins are
the same.
❍ If the margin widths of the test
patterns are not the same, touch
and to adjust it, and
then touch [Enter].
Setting a higher positive number
makes the margin wider; setting
a higher negative number
makes the margin narrower.
❍ Repeat step 3 until the widths of
both margins are the same.
? What is the standard setting?
➜ Before adjusting the third or
fourth paper drawer, enter the
same adjustment value for the
first or second paper drawer and
check the test pattern.
4 In the Expert User’s Mode screen, touch [Exit].
5 In the Administrator Mode screen, touch [Exit].
6 In the Utility screen, touch [Exit].
c: 3.0 mm ± 1.0 mm
c