Sharp UX-465L - Manual (Page 87)

Caller ID
85
8. S
peci
a
l
Func
ti
ons
2
Press the * key to scroll through
the list from the most recent call, or
the # key to scroll through the list
from the oldest call.
3
If you want to dial one of the
numbers in the list, scroll through
the list until the number appears in
the display.
•
If you want to send a fax, load the
document and then press the
START/MEMORY key.
•
If you want to make a voice call,
pick up the handset or press the
SPEAKER key. Dialing will begin
automatically. (If you pressed the
SPEAKER key, pick up the handset
when the other party answers.)
4
Press the STOP key when you
have finished viewing the list.
START/MEMORY
or
STOP
To delete calls from the
Caller ID list
If you want to delete a single call from
the caller list, press the 0 key while
the call appears in the display. If you
want to delete all calls from the list,
hold the 0 key down for at least 3
seconds while you are viewing any
number in the list.
Priority Call
If desired, you can set your fax to
make a special ringing sound when
you receive a call from a designated
phone number. This lets you know
immediately who is calling without
having to look at the display.
To use this function, enter the
desired phone number by following
the steps below (only one phone
number can be entered).
1
Press these keys:
FUNCTION
3
PRIORITY CALL #
2
Press 1 to enter a number, or 2 to
clear a number. (If you pressed 2,
go to Step 4.)
1 2 or
SET CLEAR