Sharp UX-465L User Manual

Page 31

Setting Up and Using OpenLCR

2. S

tting Up

penLCR

Follow the instructions you hear.

Note: If you are on a pulse dial line,
press the

key before pressing

the number keys to respond.
(This makes your fax temporarily
issue tone signals when you press
the number keys.)

•

When registration is completed,
your fax machine will receive the
rate data from OpenLCR. This will
last one or two minutes. When
downloading is completed, the
display will briefly show
DOWNLOAD OK!! and then revert
to the date and time.

•

OpenLCR will also program the
date and time and your fax number
in your fax machine.

Registering through
OpenLCR’s Web site

You can also register at OpenLCR’s
Web site, www.OpenLCR.com. After
registering you will need to receive
the rate data manually (service is not
activated until your fax receives the
rate data). See

Downloading

(receiving) the rate data manually on
the following page.

If you move, you
must re-register!

The rate data that you receive is based
on the address you provide when
registering with OpenLCR. If you
move, the rate data will not be correct
for your new location. In this case,
repeat the registration procedure to
give OpenLCR your new address.

Note: If you wish to connect more
than one OpenLCR-enabled device to
the same line, please call OpenLCR
at 970-206-1207. If you replace an
old OpenLCR-enabled device with a
new one, you must re-register with
OpenLCR to use the new device.

Note: OpenLCR cannot be used if
your fax machine is connected to a
Private Branch Exchange (PBX).

Downloading (receiving) the
rate data manually

Your fax machine will automatically
call OpenLCR and download updated
rate data about once every three
months. Normally you will not need to
download the rate data manually.

♦

If you register through OpenLCR’s
Web site, you must manually
download the rate data to activate
service.

♦

If the fax machine is unplugged or
some other interruption occurs in
the power, you will need to
manually download the rate data.

Press these keys to call OpenLCR
and initiate downloading:

OpenLCR