Shure DP11EQ - Manual (Page 5)

4 English –
DIP Switches
The DIP switches located on the rear panel are used for adapting the unit to the sound system
requirements. See the table below.
DIP
SWITCH
FUNCTION POSITION
SWITCH
UP DOWN
1–4 Device ID see below see below
5–8 unused — —
9 Output Sensitivity +4 dBu –10 dBV
10 Input Sensitivity +4 dBu –10 dBV
Shure Link Device ID
When multiple DP11EQ s are linked, each one must be assigned a unique Device ID, 0 through
15. DIP switches 1 through 4 on the rear panel are used to set the Device ID. To change the Device
ID, align the switches according to the illustrations below. The unit comes factory preset to Device ID
15.
1 2 3 4
DEVICE ID 0
1 2 3 4
DEVICE ID 4
1 2 3 4
DEVICE ID 12
1 2 3 4
DEVICE ID 2
1 2 3 4
DEVICE ID 6
1 2 3 4
DEVICE ID 14
1 2 3 4
DEVICE ID 1
1 2 3 4
DEVICE ID 5
1 2 3 4
DEVICE ID 13
1 2 3 4
DEVICE ID 3
1 2 3 4
DEVICE ID 7
1 2 3 4
DEVICE ID 15
SWITCH DOWN
SWITCH UP
1 2 3 4
DEVICE ID 8
1 2 3 4
DEVICE ID 10
1 2 3 4
DEVICE ID 9
1 2 3 4
DEVICE ID 11